|
|
|
|
3MOLD LED LAMP L640-31-50-2C
Fiber use Red LED
L640-31-50-2C is with off-set type InGaAlP/GaAs die and mounted on a lead frame with
a clear epoxy flat lens for fiber use.
On forward bias it emits a band of visible light, which peaks at 635nm.
|
Specifications |
|
Product Name |
Fiber use red LED
|
|
Type No. |
L640-31-50-2C
|
|
Chip |
|
|
Chip Material |
InGaAlP/GaAs
|
|
Chip Dimension |
500um*500um off-set
|
|
Peak Wavelength |
635nm typ.
|
|
Package |
|
|
Type |
?3mm flat molding
|
|
Resin Material |
Epoxy Resin
|
|
Lead Frame/cup |
0.35mm depth
|
|
Lead Frame solder |
Lead Free
|
|
Outer dimension (Unit: mm)
|
Absolute Maximum Ratings
|
Item |
Symbol |
Maximum Rated Value |
Unit |
Ambient Temperature |
| Power Dissipation | PD | 220 | mW | Ta=25°C |
| Forward Current | IF | 100 | mA | Ta=25°C |
| Pulse Forward Current | IFP | 500 | mA | Ta=25°C |
| Reverse Voltage | VR | 5 | V | Ta=25°C |
| Operating Temperature | TOPR | -30 ~ +85 | °C | |
| Storage Temperature | TSTG | -30 ~ +100 | °C | |
| Soldering Temperature | TSOL | 260 | °C | |
‡Pulse Forward Current condition: Duty=1% and Pulse Width=10us.
‡Soldering condition: Soldering condition must be completed within 3 seconds at 265°C
Electro-Optical Characteristics [Ta=25°C]
|
Item |
Symbol |
Condition |
Minimum |
Typical |
Maximum |
Unit |
|
Forward Voltage |
VF |
IF=200mA |
|
1.86 |
2.00 |
V |
|
Reverse Current |
IR |
VR=5V |
|
|
10 |
uA |
|
Total Radiated Power |
PO |
IF=20mA |
4.0 |
7.0 |
|
mW |
|
Brightness |
IV |
IF=20mA |
|
500 |
|
mcd |
|
Radiant Intensity |
IE |
IF=20mA |
|
2.5 |
|
mW/sr |
|
Peak Wavelength |
P |
IF=20mA |
625 |
635 |
645 |
nm |
|
Half Width |
|
IF=20mA |
|
18 |
|
nm |
|
Viewing Half Angle |
|
IF=20mA |
|
±50 |
|
deg. |
‡Total Radiated Power is measured by Photodyne #500
‡Radiant Intensity is measured by Tektronix J-6512
|
|
|
